How To Remove And Install The Flywheel On You 1997 – 2001 Honda CR250
The Tools You Will Need
- Philips Head Screwdriver
- Torque Wrench
- Socket Wrench
- Breaker Bar
- 17mm Wrench
- 17mm Socket
- Large Channel Lock Pliers
Specialty Tools
- Flywheel Holder
- Flywheel Puller – Size M27x1.0L
You can get all the tools you need through our partner links HERE!
Related: Here’s how to rebuild the swingarm on your 97-01 CR250.
Your flywheel is secured to your crankshaft with a single nut torqued to 40 foot-pounds. To remove the flywheel, you need to stop the crankshaft from rotating, and this is done with a flywheel holding tool. Unfortunately, the pins on my holder are too big for my flywheel, so here is how to loosen the flywheel nut without the proper tool.
Keep Your ’97-’01 CR250 Running Right!
- Service Specification
- Clutch Replacement
- Carburetor Service
- Engine Top End
- Engine Bottom End
- Brakes
- Exhaust
- Front Suspension
- Rear Suspension
- Wheels & Tires
- Kickstarter Inspection
- External Shift Linkage
