1997-2001 Honda CR250 – Front Caliper Service
How To Service The Front Brake Caliper On Your 97-01 Honda CR250The Tools You Will Need12mm Socket
Torque Wrench
6mm Hex Wrench
Small...
1997-2001 Honda CR250 – Brake Specifications
Hydraulic Brake System Specifications For Your 97-01 Honda CR250
If you need parts and tools make sure to buy them here!Service LimitsNew (mm)
Service Limit (mm)Front...
1997-2001 Honda CR250 – Rear Caliper Service
How To Service The Rear Brake Caliper On Your 97-01 Honda CR250The Tools You Will Need12mm Socket
12mm Box Wrench
Torque Wrench
6mm...
1997-2001 Honda CR250 – Rear Master Cylinder Service
How To Rebuild The Rear Master Cylinder On Your 97-01 Honda CR250The Tools You Will Need5mm Hex Wrench
8mm Hex wrench
12mm box...
1997-2001 Honda CR250 – Sprocket & Drive Chain Maintenance
How To Service The Sprockets & Drive Chain On Your 1997 - 2001 Honda CR250. Try to always change your sprockets and chain as a set. Using new parts with old parts will shorten the service life of both! The only specialty tool you will need is a chain breaker.
How To Use Rubber Grease When Installing Your Tube
Rubber grease is very sticky, so start by removing any potential contaminants from your wheel and work surface. Wear rubber gloves and clothes you don’t care about, and put a towel down to keep your work area clean. If you’ve never changed a tire, make sure to watch my tire change guide for a detailed walk-through.
Dirt Bike Tube & Tire Change
A few notes before you even take your wheel off your bike. You should never have to force your tire on or off the rim, the rim is designed to accommodate the tire during removal and installation. The rim is designed to let the tire bead drop into the center, giving you plenty of room when working on the opposite side of the rim. A warm tire is much...
How To Remove & Install The Rear Wheel On Your Dirt Bike
This is how to remove & install the rear wheel on your dirt bike. Start with your dirt bike on a stand with the rear wheel off the ground...
How To Remove & Install The Front Wheel On Your Dirt Bike
Here is how to remove and install the front wheel on your dirt bike. Start with your dirt bike on a stand and the front wheel off the ground...
1997-2001 Honda CR250: Remove & Install FRONT Wheel
How To Remove And Install The Front Wheel On Your 97-01 Honda CR250The Tools You Will Need22 mm socket for the axle nut
...
