How To Service The Steering Stem Bearings On Your 2009-2010 Honda CRF450R
You will need a steering stem nut adjustment wrench, a long nut, and bolt bearing press, and a metal pipe that fits over the steering stem, but small enough to match the diameter of the inner bearing race.
The adjustment nut wrench will cost around $13. You can get your press parts and metal pipe from your local hardware store in exchange for money.
The Tools You Will Need Are:
- Steering Stem Adjustment Wrench
- Smackin’ Pipe
- Bolt Press
- Chisel / Dremel
- 32mm Socket
- 10mm Socket
- Breaker Bar
- Long Flat Screwdriver / Blind Bearing Puller
- Torque Wrench
- Gloves
- Grease
Related: How to service the rear caliper on your 09-10 Honda CRF450r.
The Parts You Will Need Are:
- New ’09-’10 Honda CRF450R Steering Stem Bearing Kit
- Lithium EP Grease
You can get all the parts and tools you need through our partner links HERE!
Start with your bike on a stand with front end disassembled except for the forks.
