How To Remove The Cylinder Head On Your 1997 – 2001 Honda CR250
Click Here For The Full Ste-By-Step Guide!
- The Tools You Will Need Are:
- 13/16 inch Spark Plug Socket
- Philips Head Screwdriver
- 14mm Socket
- 12mm Wrench
- 8mm Hex Wrench/Socket
- Sharpie Marker
- 12mm Socket
- Shop Towels
Honda CR250 Top End Service Steps:
- Step 1: Cylinder Head Removal (Video)
- Step 2: Cylinder Removal (Video)
- Step 3: Piston Removal (Video)
- Step 4: Exhaust Valve Removal (Video)
- Step 5: Piston Inspection (Video)
- Step 6: Cylinder Head Inspection (Video)
- Step 7: Cylinder Inspection (Video)
- Step 8: Exhaust Valve Inspection (Video)
- Step 9: Clearance Calculations (Video)
- Step 10: Exhaust Valve Installation (Video)
- Step 11: Piston Installation (Video)
- Step 12: Cylinder Installation (Video)
- Step 13: Cylinder Head Installation (Video)
- Step 14: Leak Down Test (Video)
- Step 15: Engine Break-In (Video)
Click Here To Open The Top End Specifications Table In A New Window
If you need parts and tools, make sure to buy them through our retail partners! → Shop & Support
